Why do you use air filters at the gas source end in the pneumatic circuit, oil-water separator Air filter (oil-water separator) indicated in pneumatic circuit ),It is to filter out the water vapor, oil and gas, dust impurities from the compressed air at the gas source end,The air purification function is performed on the subsequent pneumatic system (loop.Because the main components that are filtered out are water and gas,So also called oil and water separator.The air filter (oil-water separator) also has different sizes, different precision (filtration degree) and so on.For example,Coarse filter,General filter,Fine filter,Oil removal filter,Deodorant filter,And so on the various nature and required filters needed in the pneumatic system.After the general oil-water separator, the pressure reducing valve (pressure regulating valve) will be followed ),And may also increase the mist.
How does the bag filter work? Bag Filter is a common equipment for solid-liquid separation, which is widely used in pharmaceutical, food, chemical and other industries. In recent years, with the development of economy and the progress of science and technology, bag filter industry has broad development prospects.The working principle of bag filter is pressure filtration, bag filter is a new type of filtration system, the filter inside the filter is supported by a metal mesh basket, the liquid flows in by the inlet, the filter bag filters out from the outlet, impurities are intercepted in the filter bag and can continue to be used after replacing the filter bag. Bag Filter is a pressure type filter device, which mainly consists of filter cylinder, filter cylinder cover and fast opening mechanism, stainless steel filter bag strengthening network and other main components, the filter fluid flows into the filter bag by the side inlet tube of the filter shell. the filter bag itself is a device in the reinforced m