Diagram of principle of front Backwashing Front filter: flush filter principle: most of them are stainless steel filter screens with 50-100um, which penetrate water from the inner wall of the pipeline to the outer wall through the pressure of tap water, for example, impurities such as sediment, rust, red worms and so on are trapped in the membrane hole, and the impurities trapped by the stainless steel film are washed away by opening the Flushing Valve door, thus realizing the flushing of the filter element.Front filter: Siphon type front filter principle: this filter uses an external pressure type, which penetrates from the outer wall of the pipe to the inside through the pressure of tap water, sediment, rust, red worms and other granular impurities are trapped on the surface, open the flushing switch, and the water flow forms a negative pressure around the filter element. the built-in water dispenser can effectively remove the dirt and impurities trapped on the filter screen, impurities trapped on the su
Qinyuan front water purifier household whole house water filtration difference between qq-t1 and t2 of central front water purifier T1 represents a ton of traffic that can be filtered per hour. T2 means two dun tons can be filtered per hour. Hope to help you.